Overview
UHB-ZK series mortar pump cantilever single-stage, single-suction centrifugal pump flow components using steel liner ultra high molecular weight polyethylene structure, with strong corrosion resistance and excellent abrasion resistance. It can deliver 80% concentration of ulfuric acid, nitric acid and less than 50%, hydrochloric acid and other acids, alkalis, salt slurry, rare metals smelting industry corrosive mortar and food, the wine industry in a variety of mixed media.
Temperature: -20°C ~ 80°C
Appearance and installation size
Use and Maintenance
Disassembly and assembly:
◆ Commissioning should be preceded by hand plate dynamic coupling, check the rotation is flexible, turned teacher correct.
◆ Open the inlet valve supply fluid source, if there is no liquid injection height of the pump must first be filled with liquid.
◆ Connected to the shaft cooling water.
◆ Start the motor to the pump, and in time to open the outlet valve.
◆ Shutdown, turn off the outlet valve, and then cut off the power, stop the supply of cooling water at the seals.
Maintenance:
◆ Always check the pump and motor temperature rise, regular replacement of oil (fat) within the bearing plane, replacement of wearing parts.
◆ Not long-term shutdown, the pump should be cleaned flow channel, and cut off the power, winter Note antifreeze.
◆ To keep the pump clean to prevent the motor from moisture.
◆ Is strictly prohibited idling or reverse.
